Skip to main content
RR BuildingsRR Buildings
BrowseMy Projects
Log inSign up
RR Buildings

Step 3 · Drain the Line

After shutting off the main water supply, relieve the pressure in the lines. Open the hot and cold handles on the faucet connected to the leaky valve. This will allow any remaining water in the supply lines to drain out into the sink. Place your bucket underneath the angle stop to prepare for the next steps.

Stesso home
SearchSearchBrowseBrowseMy ProjectsMy Projects
Log inLog inSign upSign up

Step 3 · Drain the Line

After shutting off the main water supply, relieve the pressure in the lines. Open the hot and cold handles on the faucet connected to the leaky valve. This will allow any remaining water in the supply lines to drain out into the sink. Place your bucket underneath the angle stop to prepare for the next steps.

Videos for this step

Turn off water and relieve pressurePrepare the Under-Sink PlumbingPrepare the Work Area

Tools and Materials

← Project

How to Replace a Leaky Angle Stop (Shutoff Valve) Under Your Sink

Step 3 of 9·1 hr left

Gather Tools and Prepare Work Area
10 mins5 itemsBeginner
Shut Off Main Water Supply
5 minsIntermediate
3
Drain the Line
5 mins2 itemsBeginner
4
Disconnect the Faucet Supply Line
5 mins3 itemsIntermediate
5
Remove the Old Angle Stop
15 mins3 items
6
Clean and Prepare the Pipe
5 mins2 itemsBeginner
7
Install the New Angle Stop
10 mins3 itemsAdvanced
8
Reconnect the Faucet Supply Line
5 mins2 itemsIntermediate
9
Turn Water On and Test for Leaks
15 mins2 itemsIntermediate
Prev
Next
TermsPrivacySafetyLegal© 2026 Stesso, Inc.