Skip to main content
RR BuildingsRR Buildings
BrowseMy Projects
Log inSign up
RR Buildings

Step 5 · Attach Vertical Vent Pipe

This is the step people usually slow down on. Go finger-tight first, then a quarter turn. No rush — replay the clip whenever it helps.

Cut a short piece of PVC pipe that will extend vertically from the sanitary tee. The length should be sufficient to raise the AAV to the desired height (at least 4 inches above the drain arm). Deburr the ends of this new pipe piece. Apply PVC primer and then cement to the outside of one end of the pipe and the inside of the tee's vertical socket. Insert the pipe into the tee, giving it a quarter-turn twist, and hold firmly for 30 seconds.

Stesso home
SearchSearchBrowseBrowseMy ProjectsMy Projects
Log inLog inSign upSign up

Step 5 · Attach Vertical Vent Pipe

This is the step people usually slow down on. Go finger-tight first, then a quarter turn. No rush — replay the clip whenever it helps.

Cut a short piece of PVC pipe that will extend vertically from the sanitary tee. The length should be sufficient to raise the AAV to the desired height (at least 4 inches above the drain arm). Deburr the ends of this new pipe piece. Apply PVC primer and then cement to the outside of one end of the pipe and the inside of the tee's vertical socket. Insert the pipe into the tee, giving it a quarter-turn twist, and hold firmly for 30 seconds.

Videos for this step

Install Sanitary Tee FittingConnect Horizontal Drain LineInsert the Tee Fitting

Tools and Materials

← Project

How to Install an Air Admittance Valve (AAV)

Step 5 of 7·50 min left

Preparation and Safety
15 mins3 itemsBeginner
Mark the Cut Location
10 mins3 itemsIntermediate
Cut the Drain Pipe
15 mins4 itemsAdvanced
Install the Sanitary Tee
20 mins3 itemsAdvanced
5
Attach Vertical Vent Pipe
10 mins6 itemsIntermediate
6
Install the AAV
10 mins4 itemsBeginner
7
Testing for Leaks and Performance
30 mins2 itemsBeginner
Prev
Next
TermsPrivacySafetyLegal© 2026 Stesso, Inc.