Skip to main content
RR BuildingsRR Buildings
BrowseMy Projects
Log inSign up
RR Buildings

Step 6 · Connect the Pop-Up Stopper Mechanism

This is the step people usually slow down on. Go finger-tight first, then a quarter turn. No rush — replay the clip whenever it helps.

If you are installing a pop-up drain, drop the stopper into the drain flange from above the sink. Underneath, locate the pivot rod opening on the drain body. Unscrew the pivot rod retaining nut. Insert the pivot rod through the hole in the tail of the stopper, making sure the rod is angled slightly downwards towards the floor. Tighten the retaining nut. Now, connect the pivot rod to the faucet's lift rod using the provided metal clip and strap. Put the lift rod through the hole in the faucet and connect it to the strap. Adjust the position of the pivot rod on the strap to control the height of the stopper when it's open and closed. Test the mechanism to ensure it moves smoothly.

Stesso home
SearchSearchBrowseBrowseMy ProjectsMy Projects
Log inLog inSign upSign up

Step 6 · Connect the Pop-Up Stopper Mechanism

This is the step people usually slow down on. Go finger-tight first, then a quarter turn. No rush — replay the clip whenever it helps.

If you are installing a pop-up drain, drop the stopper into the drain flange from above the sink. Underneath, locate the pivot rod opening on the drain body. Unscrew the pivot rod retaining nut. Insert the pivot rod through the hole in the tail of the stopper, making sure the rod is angled slightly downwards towards the floor. Tighten the retaining nut. Now, connect the pivot rod to the faucet's lift rod using the provided metal clip and strap. Put the lift rod through the hole in the faucet and connect it to the strap. Adjust the position of the pivot rod on the strap to control the height of the stopper when it's open and closed. Test the mechanism to ensure it moves smoothly.

Videos for this step

Install and Orient the New StopperInstall New Drain and Reconnect PlumbingRe-install Stopper Assembly

Tools and Materials

← Project

How to Install a Bathroom Sink Drain and P-Trap

Step 6 of 7·20 min left

Preparation and Removal of Old Drain
20 mins3 itemsAdvanced
Clean the Sink Drain Opening
10 mins6 itemsBeginner
Install the New Drain Flange with Putty
5 mins2 itemsIntermediate
Install the Drain Body and Tailpiece
15 mins8 itemsAdvanced
Assemble and Dry-Fit the P-Trap
20 mins3 itemsAdvanced
6
Connect the Pop-Up Stopper Mechanism
10 mins1 itemsIntermediate
7
Final Tightening and Leak Test
10 mins4 itemsIntermediate
Prev
Next
TermsPrivacySafetyLegal© 2026 Stesso, Inc.