Skip to main content
RR BuildingsRR Buildings
BrowseMy Projects
Log inSign up
RR Buildings

Step 5 · Assemble and Dry-Fit the P-Trap

This is the step most people slow down on. Take it one move at a time — there’s no rush, and you can rewind the clip as many times as you need.

The P-trap assembly consists of a J-bend (the U-shaped piece) and a wall bend (the L-shaped piece that connects to the wall). First, attach the wall bend to the drain pipe in the wall (the trap adapter). Slide a slip nut and a tapered washer (taper facing the trap adapter) onto the straight end of the wall bend and push it into the adapter. Hand-tighten the nut. Now, align the J-bend between the sink tailpiece and the wall bend. You may need to trim the sink tailpiece or the wall bend to achieve a good fit. Use a hacksaw or tubing cutter for clean, straight cuts. Slide the necessary slip nuts and washers onto the pipes, connect the J-bend, and hand-tighten all the nuts. The P-trap should have a slight downward slope from the sink tailpiece to the bend.

Stesso home
SearchSearchBrowseBrowseMy ProjectsMy Projects
Log inLog inSign upSign up

Step 5 · Assemble and Dry-Fit the P-Trap

This is the step most people slow down on. Take it one move at a time — there’s no rush, and you can rewind the clip as many times as you need.

The P-trap assembly consists of a J-bend (the U-shaped piece) and a wall bend (the L-shaped piece that connects to the wall). First, attach the wall bend to the drain pipe in the wall (the trap adapter). Slide a slip nut and a tapered washer (taper facing the trap adapter) onto the straight end of the wall bend and push it into the adapter. Hand-tighten the nut. Now, align the J-bend between the sink tailpiece and the wall bend. You may need to trim the sink tailpiece or the wall bend to achieve a good fit. Use a hacksaw or tubing cutter for clean, straight cuts. Slide the necessary slip nuts and washers onto the pipes, connect the J-bend, and hand-tighten all the nuts. The P-trap should have a slight downward slope from the sink tailpiece to the bend.

Videos for this step

Assemble and Connect P-TrapInstall P-Trap and Connect to WallPrepare and Connect Drain Pipes

Tools and Materials

← Project

How to Install a Bathroom Sink Drain and P-Trap

Step 5 of 7·40 min left

Preparation and Removal of Old Drain
20 mins3 itemsAdvanced
Clean the Sink Drain Opening
10 mins6 itemsBeginner
Install the New Drain Flange with Putty
5 mins2 itemsIntermediate
Install the Drain Body and Tailpiece
15 mins8 itemsAdvanced
5
Assemble and Dry-Fit the P-Trap
20 mins3 itemsAdvanced
6
Connect the Pop-Up Stopper Mechanism
10 mins1 itemsIntermediate
7
Final Tightening and Leak Test
10 mins4 itemsIntermediate
Prev
Next
TermsPrivacySafetyLegal© 2026 Stesso, Inc.