Skip to main content
RR BuildingsRR Buildings
BrowseMy Projects
Log inSign up
RR Buildings

Step 3 · Install the New Drain Flange with Putty

This is the step people usually slow down on. Go finger-tight first, then a quarter turn. No rush — replay the clip whenever it helps.

Take a small amount of plumber's putty, about the size of a large marble, and knead it in your hands until it becomes soft and pliable. Roll it between your palms to form a uniform rope about 1/4-inch thick. Press this rope of putty firmly and evenly around the underside of the new drain flange. Insert the drain flange into the drain opening from the top of the sink, pushing it down firmly. The excess putty should squeeze out evenly around the edges. Do not wipe away the excess putty yet; it will be removed later.

Stesso home
SearchSearchBrowseBrowseMy ProjectsMy Projects
Log inLog inSign upSign up

Step 3 · Install the New Drain Flange with Putty

This is the step people usually slow down on. Go finger-tight first, then a quarter turn. No rush — replay the clip whenever it helps.

Take a small amount of plumber's putty, about the size of a large marble, and knead it in your hands until it becomes soft and pliable. Roll it between your palms to form a uniform rope about 1/4-inch thick. Press this rope of putty firmly and evenly around the underside of the new drain flange. Insert the drain flange into the drain opening from the top of the sink, pushing it down firmly. The excess putty should squeeze out evenly around the edges. Do not wipe away the excess putty yet; it will be removed later.

Videos for this step

Apply Plumber's Putty to FlangeApply Plumber's PuttyPrepare and Apply Plumber's Putty

Tools and Materials

← Project

How to Install a Bathroom Sink Drain and P-Trap

Step 3 of 7·1 hr left

Preparation and Removal of Old Drain
20 mins3 itemsAdvanced
Clean the Sink Drain Opening
10 mins6 itemsBeginner
3
Install the New Drain Flange with Putty
5 mins2 itemsIntermediate
4
Install the Drain Body and Tailpiece
15 mins8 itemsAdvanced
5
Assemble and Dry-Fit the P-Trap
20 mins3 itemsAdvanced
6
Connect the Pop-Up Stopper Mechanism
10 mins1 itemsIntermediate
7
Final Tightening and Leak Test
10 mins4 itemsIntermediate
Prev
Next
TermsPrivacySafetyLegal© 2026 Stesso, Inc.