Skip to main content
RR BuildingsRR Buildings
BrowseMy Projects
Log inSign up
RR Buildings

Step 3 · Remove and Empty the P-Trap

With both slip nuts fully loosened, the P-trap can be removed. Carefully wiggle the trap downwards and pull it away from the tailpiece and drain arm. Try to keep it upright as you lower it to minimize spilling, then turn it upside down over the bucket to empty its contents. You will likely see a collection of hair, soap scum, and other gunk come out.

Stesso home
SearchSearchBrowseBrowseMy ProjectsMy Projects
Log inLog inSign upSign up

Step 3 · Remove and Empty the P-Trap

With both slip nuts fully loosened, the P-trap can be removed. Carefully wiggle the trap downwards and pull it away from the tailpiece and drain arm. Try to keep it upright as you lower it to minimize spilling, then turn it upside down over the bucket to empty its contents. You will likely see a collection of hair, soap scum, and other gunk come out.

Videos for this step

Disassemble the P-TrapRemove P-TrapRemove the P-Trap

Tools and Materials

← Project

How to Clean Out and Unclog a Bathroom Sink P-Trap

Step 3 of 6·25 min left

Prepare the Work Area
5 mins2 itemsBeginner
Loosen the Slip Nuts
5 minsIntermediate
3
Remove and Empty the P-Trap
5 mins2 itemsBeginner
4
Clean the P-Trap and Inspect Washers
10 mins4 itemsIntermediate
5
Reassemble the P-Trap
5 mins4 itemsIntermediate
6
Tighten and Test for Leaks
5 mins3 itemsIntermediate
Prev
Next
TermsPrivacySafetyLegal© 2026 Stesso, Inc.