Skip to main content
RR BuildingsRR Buildings
BrowseMy Projects
Log inSign up
RR Buildings

Step 2 · Loosen the Slip Nuts

This is the step people usually slow down on. Go finger-tight first, then a quarter turn. No rush — replay the clip whenever it helps.

Identify the two large slip nuts that connect the P-trap to the drain assembly. One connects to the vertical pipe coming down from the sink (the tailpiece), and the other connects to the horizontal pipe going into the wall (the drain arm). Attempt to loosen both nuts by turning them counter-clockwise by hand. If they are too tight, use a pair of channel-lock pliers or an adjustable wrench. Apply gentle, steady pressure to avoid damaging the plastic nuts or pipes.

Stesso home
SearchSearchBrowseBrowseMy ProjectsMy Projects
Log inLog inSign upSign up

Step 2 · Loosen the Slip Nuts

This is the step people usually slow down on. Go finger-tight first, then a quarter turn. No rush — replay the clip whenever it helps.

Identify the two large slip nuts that connect the P-trap to the drain assembly. One connects to the vertical pipe coming down from the sink (the tailpiece), and the other connects to the horizontal pipe going into the wall (the drain arm). Attempt to loosen both nuts by turning them counter-clockwise by hand. If they are too tight, use a pair of channel-lock pliers or an adjustable wrench. Apply gentle, steady pressure to avoid damaging the plastic nuts or pipes.

Videos for this step

Remove P-TrapDisassemble the P-TrapDisconnect the P-Trap

← Project

How to Clean Out and Unclog a Bathroom Sink P-Trap

Step 2 of 6·30 min left

Prepare the Work Area
5 mins2 itemsBeginner
2
Loosen the Slip Nuts
5 minsIntermediate
3
Remove and Empty the P-Trap
5 mins2 itemsBeginner
4
Clean the P-Trap and Inspect Washers
10 mins4 itemsIntermediate
5
Reassemble the P-Trap
5 mins4 itemsIntermediate
6
Tighten and Test for Leaks
5 mins3 itemsIntermediate
Prev
Next
TermsPrivacySafetyLegal© 2026 Stesso, Inc.