Skip to main content
RR BuildingsRR Buildings
BrowseMy Projects
Log inSign up
RR Buildings

Step 8 · Final Test After Replacement (Optional)

With the new air gap fully installed, conduct a final, thorough test. Place the new decorative cover on top. Run the dishwasher on a 'Drain' or 'Rinse' cycle. While it's draining, use a flashlight to carefully inspect all connections under the sink (both hose connections at the air gap and the connection at the garbage disposal) for any signs of dripping. Also, confirm that no water is sputtering from the top of the new air gap. Wipe each connection with a dry paper towel to make even the smallest leak obvious.

Stesso home
SearchSearchBrowseBrowseMy ProjectsMy Projects
Log inLog inSign upSign up

Step 8 · Final Test After Replacement (Optional)

With the new air gap fully installed, conduct a final, thorough test. Place the new decorative cover on top. Run the dishwasher on a 'Drain' or 'Rinse' cycle. While it's draining, use a flashlight to carefully inspect all connections under the sink (both hose connections at the air gap and the connection at the garbage disposal) for any signs of dripping. Also, confirm that no water is sputtering from the top of the new air gap. Wipe each connection with a dry paper towel to make even the smallest leak obvious.

Videos for this step

Test for LeaksFinal Checks and TestingFinal Checks and Testing

Tools and Materials

← Project

How to Clean or Replace a Dishwasher Air Gap

Step 8 of 8·5 min left

Prepare the Work Area
5 mins4 itemsBeginner
Remove the Air Gap Cover and Cap
3 mins1 itemsBeginner
Clean the Air Gap Body and Cap
10 mins1 itemsBeginner
Check and Clean the Drain Hose
10 mins4 itemsIntermediate
Reassemble and Test After Cleaning
5 mins1 itemsBeginner
Remove the Old Air Gap Assembly (Optional)
10 mins3 itemsAdvanced
Install the New Air Gap (Optional)
15 mins3 itemsAdvanced
8
Final Test After Replacement (Optional)
5 mins2 itemsBeginner
Prev
Next
TermsPrivacySafetyLegal© 2026 Stesso, Inc.