Skip to main content
RR BuildingsRR Buildings
BrowseMy Projects
Log inSign up
RR Buildings

Step 7 · Install the New Air Gap (Optional)

This is the step most people slow down on. Take it one move at a time — there’s no rush, and you can rewind the clip as many times as you need.

Take your new air gap kit. From the top of the sink, insert the threaded body of the new air gap through the hole. Ensure any gaskets included are properly seated. From under the sink, thread the new mounting nut onto the air gap body and tighten it until it is snug. Hand-tight plus a quarter-turn with pliers is usually sufficient. Now, reconnect the hoses. The smaller-diameter hose (from the dishwasher) attaches to the smaller inlet nipple on the air gap. The larger-diameter hose (to the garbage disposal) attaches to the larger outlet nipple. Secure both with their clamps.

Stesso home
SearchSearchBrowseBrowseMy ProjectsMy Projects
Log inLog inSign upSign up

Step 7 · Install the New Air Gap (Optional)

This is the step most people slow down on. Take it one move at a time — there’s no rush, and you can rewind the clip as many times as you need.

Take your new air gap kit. From the top of the sink, insert the threaded body of the new air gap through the hole. Ensure any gaskets included are properly seated. From under the sink, thread the new mounting nut onto the air gap body and tighten it until it is snug. Hand-tight plus a quarter-turn with pliers is usually sufficient. Now, reconnect the hoses. The smaller-diameter hose (from the dishwasher) attaches to the smaller inlet nipple on the air gap. The larger-diameter hose (to the garbage disposal) attaches to the larger outlet nipple. Secure both with their clamps.

Videos for this step

Explain Air Gap ConnectionsReconnect Plumbing and HosesReassemble and Test the System

Tools and Materials

← Project

How to Clean or Replace a Dishwasher Air Gap

Step 7 of 8·20 min left

Prepare the Work Area
5 mins4 itemsBeginner
Remove the Air Gap Cover and Cap
3 mins1 itemsBeginner
Clean the Air Gap Body and Cap
10 mins1 itemsBeginner
Check and Clean the Drain Hose
10 mins4 itemsIntermediate
Reassemble and Test After Cleaning
5 mins1 itemsBeginner
Remove the Old Air Gap Assembly (Optional)
10 mins3 itemsAdvanced
7
Install the New Air Gap (Optional)
15 mins3 itemsAdvanced
8
Final Test After Replacement (Optional)
5 mins2 itemsBeginner
Prev
Next
TermsPrivacySafetyLegal© 2026 Stesso, Inc.