Skip to main content
RR BuildingsRR Buildings
BrowseMy Projects
Log inSign up
RR Buildings

Step 4 · Check and Clean the Drain Hose

This is the step people usually slow down on. Go finger-tight first, then a quarter turn. No rush — replay the clip whenever it helps.

If the top of the air gap is clean, the clog is likely in the drain hose leading from the air gap to the garbage disposal. Under the sink, locate the larger of the two hoses connected to the bottom of the air gap. Place a bucket underneath it. Loosen the hose clamp holding it to the garbage disposal inlet or sink drain tee and pull the hose off. Check the hose and the inlet port for blockages. Use a small brush or a blunt object like a screwdriver to clear any gunk. Reconnect the hose and tighten the clamp.

Stesso home
SearchSearchBrowseBrowseMy ProjectsMy Projects
Log inLog inSign upSign up

Step 4 · Check and Clean the Drain Hose

This is the step people usually slow down on. Go finger-tight first, then a quarter turn. No rush — replay the clip whenever it helps.

If the top of the air gap is clean, the clog is likely in the drain hose leading from the air gap to the garbage disposal. Under the sink, locate the larger of the two hoses connected to the bottom of the air gap. Place a bucket underneath it. Loosen the hose clamp holding it to the garbage disposal inlet or sink drain tee and pull the hose off. Check the hose and the inlet port for blockages. Use a small brush or a blunt object like a screwdriver to clear any gunk. Reconnect the hose and tighten the clamp.

Videos for this step

Clear the Clog with a Drain SnakeRemove the Old Air GapConnect to Garbage Disposal

Tools and Materials

← Project

How to Clean or Replace a Dishwasher Air Gap

Step 4 of 8·45 min left

Prepare the Work Area
5 mins4 itemsBeginner
Remove the Air Gap Cover and Cap
3 mins1 itemsBeginner
Clean the Air Gap Body and Cap
10 mins1 itemsBeginner
4
Check and Clean the Drain Hose
10 mins4 itemsIntermediate
5
Reassemble and Test After Cleaning
5 mins1 itemsBeginner
6
Remove the Old Air Gap Assembly (Optional)
10 mins3 itemsAdvanced
7
Install the New Air Gap (Optional)
15 mins3 itemsAdvanced
8
Final Test After Replacement (Optional)
5 mins2 itemsBeginner
Prev
Next
TermsPrivacySafetyLegal© 2026 Stesso, Inc.