Skip to main content
RR BuildingsRR Buildings
BrowseMy Projects
Log inSign up
RR Buildings

Step 5 · Reassemble and Test After Cleaning

Once everything has been cleaned and the hose is reconnected, reassemble the air gap on top of the sink. Place the plastic cap back on, followed by the decorative cover (screw or snap it back into place). To test your work, run your dishwasher on a 'Rinse' or 'Drain' cycle. This will force water through the system. Watch the air gap closely to ensure no water leaks from the top. Also, check under the sink to make sure the hose connection you worked on is dry and not leaking.

Stesso home
SearchSearchBrowseBrowseMy ProjectsMy Projects
Log inLog inSign upSign up

Step 5 · Reassemble and Test After Cleaning

Once everything has been cleaned and the hose is reconnected, reassemble the air gap on top of the sink. Place the plastic cap back on, followed by the decorative cover (screw or snap it back into place). To test your work, run your dishwasher on a 'Rinse' or 'Drain' cycle. This will force water through the system. Watch the air gap closely to ensure no water leaks from the top. Also, check under the sink to make sure the hose connection you worked on is dry and not leaking.

Videos for this step

Test for LeaksPlumbing ConnectionsTurn on Water Supply and Check for Leaks

Tools and Materials

← Project

How to Clean or Replace a Dishwasher Air Gap

Step 5 of 8·35 min left

Prepare the Work Area
5 mins4 itemsBeginner
Remove the Air Gap Cover and Cap
3 mins1 itemsBeginner
Clean the Air Gap Body and Cap
10 mins1 itemsBeginner
Check and Clean the Drain Hose
10 mins4 itemsIntermediate
5
Reassemble and Test After Cleaning
5 mins1 itemsBeginner
6
Remove the Old Air Gap Assembly (Optional)
10 mins3 itemsAdvanced
7
Install the New Air Gap (Optional)
15 mins3 itemsAdvanced
8
Final Test After Replacement (Optional)
5 mins2 itemsBeginner
Prev
Next
TermsPrivacySafetyLegal© 2026 Stesso, Inc.