Skip to main content
RR BuildingsRR Buildings
BrowseMy Projects
Log inSign up
RR Buildings

Step 4 · Edging and Corner Sanding

After the main floor has been rough sanded with the drum sander, use an edger sander to tackle the perimeter of the room. This machine is designed to get close to walls and into corners. Operate the edger in a smooth, steady motion, slightly overlapping the areas already sanded by the drum sander. Be careful not to over-sand any one area, which can create a noticeable dip. For tight corners, a sanding block or a detail sander may be necessary.

Stesso home
SearchSearchBrowseBrowseMy ProjectsMy Projects
Log inLog inSign upSign up

Step 4 · Edging and Corner Sanding

After the main floor has been rough sanded with the drum sander, use an edger sander to tackle the perimeter of the room. This machine is designed to get close to walls and into corners. Operate the edger in a smooth, steady motion, slightly overlapping the areas already sanded by the drum sander. Be careful not to over-sand any one area, which can create a noticeable dip. For tight corners, a sanding block or a detail sander may be necessary.

Videos for this step

Sand Edges with Edging SanderEdge and Corner SandingEdge and Detail Sanding

Tools and Materials

← Project

Hardwood Floor Refinishing

Step 4 of 12·89 hr left

Inspect and Clean the Floor
120 minutes6 items
Masking and Protection
90 minutes3 items
Rough Sanding (Drum Sander)
180 minutes3 items
4
Edging and Corner Sanding
120 minutes3 items
5
Intermediate Sanding (Buffer/Orbital Sander)
150 minutes2 items
6
Fine Sanding (Buffer/Orbital Sander)
120 minutes2 items
7
Thorough Dust Removal
180 minutes4 items
8
Stain Application (Optional)
120 minutes3 items
9
Apply First Coat of Finish
90 minutes2 items
10
Light Sanding Between Coats
60 minutes3 items
11
Apply Subsequent Coats of Finish
180 minutes4 items
12
Final Curing and Furniture Placement
4320 minutes1 items
Prev
Next
TermsPrivacySafetyLegal© 2026 Stesso, Inc.