Skip to main content
RR BuildingsRR Buildings
BrowseMy Projects
Log inSign up
RR Buildings

Step 1 · Inspect and Clean the Floor

Before any sanding or finishing can begin, a comprehensive inspection of the hardwood floor is essential. Look for any areas with loose boards, protruding nails, or persistent squeaks. Address these issues by securing loose boards with screws or nails and lubricating squeaky floorboards. Following the inspection, a thorough cleaning is paramount. Sweep and vacuum the entire floor to remove all loose dirt, dust, pet hair, and any other debris. For a deeper clean, use a slightly damp mop with a hardwood floor cleaner, ensuring not to oversaturate the wood. Allow the floor to dry completely before proceeding.

Stesso home
SearchSearchBrowseBrowseMy ProjectsMy Projects
Log inLog inSign upSign up

Step 1 · Inspect and Clean the Floor

Before any sanding or finishing can begin, a comprehensive inspection of the hardwood floor is essential. Look for any areas with loose boards, protruding nails, or persistent squeaks. Address these issues by securing loose boards with screws or nails and lubricating squeaky floorboards. Following the inspection, a thorough cleaning is paramount. Sweep and vacuum the entire floor to remove all loose dirt, dust, pet hair, and any other debris. For a deeper clean, use a slightly damp mop with a hardwood floor cleaner, ensuring not to oversaturate the wood. Allow the floor to dry completely before proceeding.

Videos for this step

Clean the FloorPrepare Floors by Removing ObstaclesThoroughly Clean the Floor

Tools and Materials

← Project

Hardwood Floor Refinishing

Step 1 of 12·95.5 hr left

1
Inspect and Clean the Floor
120 minutes6 items
2
Masking and Protection
90 minutes3 items
3
Rough Sanding (Drum Sander)
180 minutes3 items
4
Edging and Corner Sanding
120 minutes3 items
5
Intermediate Sanding (Buffer/Orbital Sander)
150 minutes2 items
6
Fine Sanding (Buffer/Orbital Sander)
120 minutes2 items
7
Thorough Dust Removal
180 minutes4 items
8
Stain Application (Optional)
120 minutes3 items
9
Apply First Coat of Finish
90 minutes2 items
10
Light Sanding Between Coats
60 minutes3 items
11
Apply Subsequent Coats of Finish
180 minutes4 items
12
Final Curing and Furniture Placement
4320 minutes1 items
Prev
Next
TermsPrivacySafetyLegal© 2026 Stesso, Inc.