Skip to main content
RR BuildingsRR Buildings
BrowseMy Projects
Log inSign up
RR Buildings

Step 3 · Reinforce Loose Risers

If a riser is loose, drive screws or nails through the face of the riser into the back of the tread. Ensure the screws/nails are long enough for a good hold. For additional support or if direct attachment is difficult, attach L-brackets to the back of the riser and the adjacent stringer. Use appropriate screws for attaching the brackets to both wood surfaces.

Stesso home
SearchSearchBrowseBrowseMy ProjectsMy Projects
Log inLog inSign upSign up

Step 3 · Reinforce Loose Risers

If a riser is loose, drive screws or nails through the face of the riser into the back of the tread. Ensure the screws/nails are long enough for a good hold. For additional support or if direct attachment is difficult, attach L-brackets to the back of the riser and the adjacent stringer. Use appropriate screws for attaching the brackets to both wood surfaces.

Videos for this step

Secure Risers to Treads from BehindSecure Loose Risers with Angled Screw (Optional for PVA Method)Secure Back Risers with Angled Screws

Tools and Materials

← Project

How to Fix a Bouncy or Wobbly Staircase

Step 3 of 8·6.3 hr left

Inspect Staircase for Looseness
60 minutes2 items
Address Loose Treads
45 minutes5 items
3
Reinforce Loose Risers
30 minutes4 items
4
Tighten Loose Stringers
90 minutes6 items
5
Stabilize Handrails and Balusters
60 minutes6 items
6
Add Support Blocks or Bracing
75 minutes5 items
7
Check and Secure Ledger Board (if applicable)
90 minutes5 items
8
Test Stability and Make Adjustments
30 minutes1 items
Prev
Next
TermsPrivacySafetyLegal© 2026 Stesso, Inc.