Secure Loose Risers with Angled Screw (Optional for PVA Method) — Reinforce Loose Risers
Part of project
How to Fix a Bouncy or Wobbly Staircase · Step 3 of 8
In this video
For extremely loose risers where there is a large gap and no access from underneath the staircase, a screw can be used in conjunction with the PVA. Start by drilling a small pilot hole perpendicular to the tread. Then, remove the drill and redrill the hole at a steep 45-degree angle, aiming for the center of the riser. Use a countersink bit to create a depression around the hole so the screw head will sit flush. Drive a screw into this angled hole to pull the loose riser tight against the tread. Once tightened, apply the diluted PVA mixture into any remaining gaps.
Secure Loose Risers with Angled Screw (Optional for PVA Method) — Reinforce Loose Risers
Part of project
How to Fix a Bouncy or Wobbly Staircase · Step 3 of 8
In this video
For extremely loose risers where there is a large gap and no access from underneath the staircase, a screw can be used in conjunction with the PVA. Start by drilling a small pilot hole perpendicular to the tread. Then, remove the drill and redrill the hole at a steep 45-degree angle, aiming for the center of the riser. Use a countersink bit to create a depression around the hole so the screw head will sit flush. Drive a screw into this angled hole to pull the loose riser tight against the tread. Once tightened, apply the diluted PVA mixture into any remaining gaps.