Step 5 · Stabilize Handrails and Balusters
Inspect the handrail system. If the handrail itself is wobbly, locate the mounting brackets. If attached to a wall, ensure the screws go into wall studs. If attached to newel posts or directly to stringers, ensure those connections are solid. Tighten any visible screws or bolts. If the handrail is loose within its brackets, you may need to use adhesive or set screws. For loose balusters, check if they are loose at the top or bottom. If loose at the bottom where they enter the tread or skirt board, apply wood glue and re-seat them. If loose at the top where they enter the handrail, remove any excess glue or finish, apply wood glue, and clamp them firmly until dry. In some cases, balusters might be secured with screws from the underside of the handrail or from the back of the tread, which would need tightening.