Skip to main content
RR BuildingsRR Buildings
BrowseMy Projects
Log inSign up
RR Buildings
Project video

Step 8 · Reinstall retaining nut/clip

If you removed a retaining nut, screw it back on clockwise using an adjustable wrench until snug. If you removed a clip, carefully insert it back into its slot using needle-nose pliers. Ensure the cartridge is firmly held in place.

Stesso home
SearchSearchBrowseBrowseMy ProjectsMy Projects
Log inLog inSign upSign up

Step 8 · Reinstall retaining nut/clip

If you removed a retaining nut, screw it back on clockwise using an adjustable wrench until snug. If you removed a clip, carefully insert it back into its slot using needle-nose pliers. Ensure the cartridge is firmly held in place.

Tools and Materials

← Project

Faucet Repair

Step 8 of 10·11 min left

Turn off water supply
1 minute1 items
Open faucet to relieve pressure
1 minute
Disassemble faucet handle
5 minutes3 items
Remove retaining nut/clip
3 minutes2 items
Extract the faucet cartridge
2 minutes1 items
Clean the faucet body
3 minutes2 items
Insert the new faucet cartridge
2 minutes1 items
8
Reinstall retaining nut/clip
3 minutes2 items
9
Reassemble faucet handle
3 minutes2 items
10
Turn on water supply and test
5 minutes2 items
Prev
Next
TermsPrivacySafetyLegal© 2026 Stesso, Inc.