Skip to main content
RR BuildingsRR Buildings
BrowseMy Projects
Log inSign up
RR Buildings
Project video

Step 3 · Disassemble faucet handle

Pry off the decorative cap on the faucet handle using a flathead screwdriver or a putty knife. Once the cap is removed, you will see a set screw. Loosen this set screw with an Allen wrench or screwdriver, depending on the type of screw, and then lift the handle straight up and off the faucet body.

Stesso home
SearchSearchBrowseBrowseMy ProjectsMy Projects
Log inLog inSign upSign up

Step 3 · Disassemble faucet handle

Pry off the decorative cap on the faucet handle using a flathead screwdriver or a putty knife. Once the cap is removed, you will see a set screw. Loosen this set screw with an Allen wrench or screwdriver, depending on the type of screw, and then lift the handle straight up and off the faucet body.

Tools and Materials

← Project

Faucet Repair

Step 3 of 10·26 min left

Turn off water supply
1 minute1 items
Open faucet to relieve pressure
1 minute
3
Disassemble faucet handle
5 minutes3 items
4
Remove retaining nut/clip
3 minutes2 items
5
Extract the faucet cartridge
2 minutes1 items
6
Clean the faucet body
3 minutes2 items
7
Insert the new faucet cartridge
2 minutes1 items
8
Reinstall retaining nut/clip
3 minutes2 items
9
Reassemble faucet handle
3 minutes2 items
10
Turn on water supply and test
5 minutes2 items
Prev
Next
TermsPrivacySafetyLegal© 2026 Stesso, Inc.