Skip to main content
RR BuildingsRR Buildings
BrowseMy Projects
Log inSign up
RR Buildings
Project video

Step 2 · Open faucet to relieve pressure

After shutting off the water supply, move the faucet handle to the 'on' position for both hot and cold to drain any residual water trapped in the faucet and pipes. This also helps to confirm that the water supply has been successfully turned off.

Stesso home
SearchSearchBrowseBrowseMy ProjectsMy Projects
Log inLog inSign upSign up

Step 2 · Open faucet to relieve pressure

After shutting off the water supply, move the faucet handle to the 'on' position for both hot and cold to drain any residual water trapped in the faucet and pipes. This also helps to confirm that the water supply has been successfully turned off.

← Project

Faucet Repair

Step 2 of 10·27 min left

Turn off water supply
1 minute1 items
2
Open faucet to relieve pressure
1 minute
3
Disassemble faucet handle
5 minutes3 items
4
Remove retaining nut/clip
3 minutes2 items
5
Extract the faucet cartridge
2 minutes1 items
6
Clean the faucet body
3 minutes2 items
7
Insert the new faucet cartridge
2 minutes1 items
8
Reinstall retaining nut/clip
3 minutes2 items
9
Reassemble faucet handle
3 minutes2 items
10
Turn on water supply and test
5 minutes2 items
Prev
Next
TermsPrivacySafetyLegal© 2026 Stesso, Inc.