Skip to main content
RR BuildingsRR Buildings
BrowseMy Projects
Log inSign up
RR Buildings

Step 3 · Prepare LED Strip Ends for Connection

For each LED strip segment that needs to be connected to another segment or to a power wire, you'll need to prepare the ends. Carefully peel back the adhesive backing to expose the copper solder pads. If using solderless connectors, ensure the pads are clean and free of debris. If soldering, lightly sand the copper pads with fine-grit sandpaper to ensure good adhesion for the solder.

Stesso home
SearchSearchBrowseBrowseMy ProjectsMy Projects
Log inLog inSign upSign up

Step 3 · Prepare LED Strip Ends for Connection

For each LED strip segment that needs to be connected to another segment or to a power wire, you'll need to prepare the ends. Carefully peel back the adhesive backing to expose the copper solder pads. If using solderless connectors, ensure the pads are clean and free of debris. If soldering, lightly sand the copper pads with fine-grit sandpaper to ensure good adhesion for the solder.

Videos for this step

Prepare and Connect LED StripsAttach Solderless ConnectorsPrepare Strip Ends

Tools and Materials

← Project

How to Cut and Join LED Strip Lights Around Stair Corners

Step 3 of 7·2.7 hr left

Plan LED Strip Layout
30 minutes3 items
Cut LED Strips to Length
15 minutes2 items
3
Prepare LED Strip Ends for Connection
20 minutes3 items
4
Join LED Strips (if necessary)
45 minutes7 items
5
Mount LED Strips to Stairs
30 minutes5 items
6
Connect Power Supply and Test
40 minutes4 items
7
Secure and Conceal Wiring
25 minutes3 items
Prev
Next
TermsPrivacySafetyLegal© 2026 Stesso, Inc.