Skip to main content

Attach Solderless Connectors — Prepare LED Strip Ends for Connection

Beginner4 hours

Part of project

How to Cut and Join LED Strip Lights Around Stair Corners · Step 3 of 7

Helpful?

In this video

Attach solderless connectors to the cut ends of the LED strip. Begin by gently peeling off both the paper backing and the thick 3M adhesive tape from the last half-inch of the LED strip's cut end, exposing the copper solder pads. Open the clasp of the solderless connector and carefully slide the exposed end of the LED strip into the connector. Ensure that the copper pads on the LED strip align directly with the metal teeth inside the connector. Pay close attention to polarity, as indicated by markings on the strip (e.g., 24V, R, G, B, W, WW, CW). Always follow these polarity markings regardless of the connector wire colors. Once the strip is properly seated, use pliers to firmly press down the connector's clasp until it clicks into place, creating a secure electrical connection. Repeat for any other segments needing connection.

328.9K views1.7K