Step 2 · Connect Controller to Power Supply
Identify the power input connector on the LED controller. This is usually a barrel jack or a pair of screw terminals labeled 'DC IN', '+/-', or similar. Locate the output connector from your power supply. This might be a barrel plug or bare wires. Connect the power supply's output to the controller's input. If using a barrel plug, ensure it matches the controller's jack size and that the center pin is positive (+) and the outer sleeve is negative (-), or vice-versa, as specified by the controller. If using screw terminals or bare wires, connect the positive (+) wire from the power supply to the positive (+) terminal on the controller and the negative (-) wire to the negative (-) terminal. Double-check the voltage rating of both the power supply and the controller to ensure they are compatible (e.g., both 12V or both 24V).