Skip to main content
RR BuildingsRR Buildings
BrowseMy Projects
Log inSign up
RR Buildings

Step 1 · Connect LED Strips to Controller

Locate the input ports on the LED controller, typically labeled for 'R', 'G', 'B', and 'W' (or similar, depending on the controller type, e.g., single color, RGB, RGBW). Identify the corresponding connectors on the LED light strips. For RGBW strips, there will be separate connections for red, green, blue, and white LEDs. For single or dual-color strips, connect the appropriate wires to the designated ports. Pay close attention to the polarity markings (+ and -) on both the controller and the strip connectors to ensure they are matched correctly. If using solderless connectors, slide the strip into the connector, ensuring the copper contacts align with the pins. If soldering, carefully solder the wires to the designated pads on the strip, again observing polarity.

Stesso home
SearchSearchBrowseBrowseMy ProjectsMy Projects
Log inLog inSign upSign up

Step 1 · Connect LED Strips to Controller

Locate the input ports on the LED controller, typically labeled for 'R', 'G', 'B', and 'W' (or similar, depending on the controller type, e.g., single color, RGB, RGBW). Identify the corresponding connectors on the LED light strips. For RGBW strips, there will be separate connections for red, green, blue, and white LEDs. For single or dual-color strips, connect the appropriate wires to the designated ports. Pay close attention to the polarity markings (+ and -) on both the controller and the strip connectors to ensure they are matched correctly. If using solderless connectors, slide the strip into the connector, ensuring the copper contacts align with the pins. If soldering, carefully solder the wires to the designated pads on the strip, again observing polarity.

Videos for this step

Connect LED Light Strips to ControllerConnect LED Strips to ControllerConnect LED Strip to Controller

Tools and Materials

← Project

How to Connect LED Light Strips to a Controller and Power Supply

Step 1 of 4·50 min left

1
Connect LED Strips to Controller
15 minutes6 items
2
Connect Controller to Power Supply
10 minutes3 items
3
Test the Lighting System
5 minutes2 items
4
Mount LED Strips and Controller
20 minutes8 items
Prev
Next
TermsPrivacySafetyLegal© 2026 Stesso, Inc.