Skip to main content
RR BuildingsRR Buildings
BrowseMy Projects
Log inSign up
RR Buildings

Step 3 · Clean Battery Terminals

Corrosion on the battery terminals and cable clamps can impede electrical flow, leading to inaccurate test results. Use a wire brush or a dedicated battery terminal cleaner tool to thoroughly scrub both the battery posts and the inside of the cable clamps until they are clean and shiny. This ensures optimal contact for voltage and load testing.

Stesso home
SearchSearchBrowseBrowseMy ProjectsMy Projects
Log inLog inSign upSign up

Step 3 · Clean Battery Terminals

Corrosion on the battery terminals and cable clamps can impede electrical flow, leading to inaccurate test results. Use a wire brush or a dedicated battery terminal cleaner tool to thoroughly scrub both the battery posts and the inside of the cable clamps until they are clean and shiny. This ensures optimal contact for voltage and load testing.

Videos for this step

Inspect and Clean Battery TerminalsClean Battery Terminals with Wire BrushClean and Tighten Terminals

Tools and Materials

← Project

Car Battery Testing

Step 3 of 7·35 min left

Identify Battery Symptoms
5 minutes
Disconnect Battery Terminals
5 minutes2 items
3
Clean Battery Terminals
10 minutes2 items
4
Perform Voltage Test
5 minutes1 items
5
Perform Load Test
10 minutes2 items
6
Interpret Test Results
5 minutes
7
Reconnect Battery Terminals
5 minutes2 items
Prev
Next
TermsPrivacySafetyLegal© 2026 Stesso, Inc.