Skip to main content

Inspect and Clean Battery Terminals — Clean Battery Terminals

Beginner2 hours

Part of project

Car Battery Testing · Step 3 of 7

Helpful?

In this video

Before any electrical testing, it's crucial to ensure all battery connections are clean and secure. Begin by disconnecting both the positive and negative battery terminals. Visually inspect the terminals and battery posts for any signs of corrosion (a white or greenish powdery substance). Use a battery terminal cleaning brush (a small, inexpensive tool available at auto parts stores) to thoroughly clean both the battery posts and the inside surfaces of the cable clamps. Once cleaned, reattach the cables, ensuring they are tightened securely to prevent any loose connections, which can impede current flow and cause various electrical problems.

321.6K views18.7K
Scotty Kilmer

6.6M subscribers

View Channel

FAQs

Is a dedicated Carbon Pile Battery Tester absolutely necessary, or can I perform a comprehensive test with just a multimeter?

While a multimeter checks static voltage, a carbon pile tester is crucial for a definitive load test, which simulates starting conditions. Many auto parts stores offer free battery load testing if you'd prefer not to purchase this specialized tool. It provides a more accurate diagnosis of your battery's ability to hold a charge under stress.

What are the most critical safety precautions to observe when working with a car battery?

Always wear safety glasses and gloves to protect against acid splashes and electrical shocks. Ensure good ventilation to disperse hydrogen gas, which is highly flammable. Disconnect the negative terminal first to minimize the risk of accidental short circuits.

How important is cleaning the battery terminals before testing, and what if I skip this step?

Cleaning the terminals is vital because corrosion and dirt create resistance, leading to inaccurate test results. Skipping this step can give you a false reading, potentially indicating a healthy battery as faulty or vice versa. Use a dedicated battery terminal cleaner and wire brush for best results.

After performing the tests, what does it mean if my battery's voltage is good but it fails the load test?

This often indicates a battery that can hold a surface charge but lacks the necessary cranking amps to start your engine. You might be able to recharge it for a temporary fix, but it's usually a sign that the battery is nearing the end of its life. Prepare for a replacement soon, and consider having your car's charging system checked as well.

Transcript
Hide

it turn on the headlights on the radio when you get your dashboard lights flickering you got a problem with power first thing to do always start basically take off both battery terminals clean the terminals on the battery clean the inside of the cables they make a little tool cost two bucks at all bars store wire brush and then you clean them all tighten it up could be as simple as you got a loose connection make sure all the battery parts are connected in just because you got 12.5 volts that doesn't

Auto-generated transcript. May contain errors.