Skip to main content
RR BuildingsRR Buildings
BrowseMy Projects
Log inSign up
RR Buildings

Step 2 · Disconnect Battery Terminals

To safely begin testing, you need to disconnect the car battery. First, locate the battery under the hood. Using an appropriate-sized wrench (commonly 10mm or 13mm), loosen the nut on the negative terminal clamp (usually marked with a '-' symbol or black cover) and remove the cable. Then, do the same for the positive terminal clamp (usually marked with a '+' symbol or red cover). It's crucial to disconnect the negative terminal first to prevent accidental short circuits.

Stesso home
SearchSearchBrowseBrowseMy ProjectsMy Projects
Log inLog inSign upSign up

Step 2 · Disconnect Battery Terminals

To safely begin testing, you need to disconnect the car battery. First, locate the battery under the hood. Using an appropriate-sized wrench (commonly 10mm or 13mm), loosen the nut on the negative terminal clamp (usually marked with a '-' symbol or black cover) and remove the cable. Then, do the same for the positive terminal clamp (usually marked with a '+' symbol or red cover). It's crucial to disconnect the negative terminal first to prevent accidental short circuits.

Videos for this step

Disconnect Negative Battery TerminalDisconnect Battery TerminalsDisconnect Negative Battery Cable

Tools and Materials

← Project

Car Battery Testing

Step 2 of 7·40 min left

Identify Battery Symptoms
5 minutes
2
Disconnect Battery Terminals
5 minutes2 items
3
Clean Battery Terminals
10 minutes2 items
4
Perform Voltage Test
5 minutes1 items
5
Perform Load Test
10 minutes2 items
6
Interpret Test Results
5 minutes
7
Reconnect Battery Terminals
5 minutes2 items
Prev
Next
TermsPrivacySafetyLegal© 2026 Stesso, Inc.