Skip to main content
RR BuildingsRR Buildings
BrowseMy Projects
Log inSign up
RR Buildings

Step 3 · Connect Control Device to Stair Lights

Carefully connect the 'load' or 'switched hot' wire from your control device to the wire that previously went directly to your stair lights (or the hot wire feeding your light switch if it's a switch-controlled system). Ensure a secure connection using wire nuts or appropriate connectors. If your control device requires a neutral connection and your existing wiring does not readily provide one at the device location, you may need to consult an electrician or run a new neutral wire.

Stesso home
SearchSearchBrowseBrowseMy ProjectsMy Projects
Log inLog inSign upSign up

Step 3 · Connect Control Device to Stair Lights

Carefully connect the 'load' or 'switched hot' wire from your control device to the wire that previously went directly to your stair lights (or the hot wire feeding your light switch if it's a switch-controlled system). Ensure a secure connection using wire nuts or appropriate connectors. If your control device requires a neutral connection and your existing wiring does not readily provide one at the device location, you may need to consult an electrician or run a new neutral wire.

Videos for this step

Connect Switch Leg at Light FixtureConnect All Wires to the Smart Switch

Tools and Materials

← Project

How to Add a Dusk-To-Dawn or Timer Control to Stair Lights

Step 3 of 5·1.2 hr left

Turn Off Power
10 minutes3 items
Install the Control Sensor/Timer
60 minutes6 items
3
Connect Control Device to Stair Lights
45 minutes4 items
4
Test the System
15 minutes2 items
5
Secure and Tidy Up
10 minutes2 items
Prev
Next
TermsPrivacySafetyLegal© 2026 Stesso, Inc.