Skip to main content

Connect Switch Leg at Light Fixture — Connect Control Device to Stair Lights

Beginner4 hours

Part of project

How to Add a Dusk-To-Dawn or Timer Control to Stair Lights · Step 3 of 5

Helpful?

In this video

This is the most critical wiring step. At the light fixture (ceiling box), you need to modify the incoming constant power. First, disconnect the original incoming hot (black) wire from the light fixture's hot terminal. Then, connect this incoming hot (black) wire to the black wire of the new 2-conductor switch leg cable using a wire nut. Next, take the white wire from the new switch leg cable (which is now carrying switched hot power from the switch) and connect it to the light fixture's hot terminal (where the original hot wire was). It is crucial to mark this white wire with black electrical tape or a marker to indicate it is carrying switched hot power and is not a neutral. Finally, connect the original incoming neutral (white) wire directly to the light fixture's neutral terminal. All bare copper ground wires (from the incoming power, the switch leg, and the light fixture if it has a terminal) should be joined together and securely connected.

29.0K views409