Skip to main content
RR BuildingsRR Buildings
BrowseMy Projects
Log inSign up
RR Buildings

Step 9 · Sweep Joint Sand

Spread a layer of polymeric sand over the entire paver surface. Use a soft-bristled broom to sweep the sand, ensuring it fills all the joints between the pavers completely. Work in sections, sweeping excess sand off the paver surface as you go. Once the joints are filled, lightly mist the patio with water according to the manufacturer's instructions to activate the sand's binding properties.

Stesso home
SearchSearchBrowseBrowseMy ProjectsMy Projects
Log inLog inSign upSign up

Step 9 · Sweep Joint Sand

Spread a layer of polymeric sand over the entire paver surface. Use a soft-bristled broom to sweep the sand, ensuring it fills all the joints between the pavers completely. Work in sections, sweeping excess sand off the paver surface as you go. Once the joints are filled, lightly mist the patio with water according to the manufacturer's instructions to activate the sand's binding properties.

Videos for this step

Video 1Video 2Video 3

← Project

Concrete Paver Patio

Step 9 of 10·1 min left

Mark the Patio Area
0 mins
Excavate the Area
0 mins
Compact the Base
0 mins
Install Gravel Base
0 mins
Install Edge Restraints
0 mins
Add and Level Sand Bed
0 mins
Lay the Pavers
0 mins
Cut and Fit Edge Pavers
0 mins
9
Sweep Joint Sand
0 mins
10
Compact the Pavers
0 mins
Prev
Next
TermsPrivacySafetyLegal© 2026 Stesso, Inc.