Skip to main content
RR BuildingsRR Buildings
BrowseMy Projects
Log inSign up
RR Buildings

Step 10 · Compact the Pavers

After the polymeric sand has set (follow manufacturer's cure time), use a plate compactor equipped with a protective rubber mat or carpet scrap to vibrate the pavers. Make several passes over the entire patio surface. This process settles the pavers into the sand bed, ensures they are uniformly level, and further helps to embed the polymeric sand into the joints, creating a solid surface.

Stesso home
SearchSearchBrowseBrowseMy ProjectsMy Projects
Log inLog inSign upSign up

Step 10 · Compact the Pavers

After the polymeric sand has set (follow manufacturer's cure time), use a plate compactor equipped with a protective rubber mat or carpet scrap to vibrate the pavers. Make several passes over the entire patio surface. This process settles the pavers into the sand bed, ensures they are uniformly level, and further helps to embed the polymeric sand into the joints, creating a solid surface.

Videos for this step

Video 1Video 2Video 3

← Project

Concrete Paver Patio

Step 10 of 10·almost done

Mark the Patio Area
0 mins
Excavate the Area
0 mins
Compact the Base
0 mins
Install Gravel Base
0 mins
Install Edge Restraints
0 mins
Add and Level Sand Bed
0 mins
Lay the Pavers
0 mins
Cut and Fit Edge Pavers
0 mins
Sweep Joint Sand
0 mins
10
Compact the Pavers
0 mins
Prev
Next
TermsPrivacySafetyLegal© 2026 Stesso, Inc.