Skip to main content
RR BuildingsRR Buildings
BrowseMy Projects
Log inSign up
RR Buildings

Step 2 · Excavate the Area

Using a shovel or a power auger (for larger areas or tougher soil), remove the existing gravel and soil within the marked perimeter. The excavation depth should be sufficient to accommodate the thickness of your concrete pavers, plus approximately 4-6 inches for the compacted gravel base, and about 1 inch for the leveling sand. Ensure the bottom of the excavated area is relatively level.

Stesso home
SearchSearchBrowseBrowseMy ProjectsMy Projects
Log inLog inSign upSign up

Step 2 · Excavate the Area

Using a shovel or a power auger (for larger areas or tougher soil), remove the existing gravel and soil within the marked perimeter. The excavation depth should be sufficient to accommodate the thickness of your concrete pavers, plus approximately 4-6 inches for the compacted gravel base, and about 1 inch for the leveling sand. Ensure the bottom of the excavated area is relatively level.

Videos for this step

Video 1Video 2Video 3

← Project

Concrete Paver Patio

Step 2 of 10·5 min left

Mark the Patio Area
0 mins
2
Excavate the Area
0 mins
3
Compact the Base
0 mins
4
Install Gravel Base
0 mins
5
Install Edge Restraints
0 mins
6
Add and Level Sand Bed
0 mins
7
Lay the Pavers
0 mins
8
Cut and Fit Edge Pavers
0 mins
9
Sweep Joint Sand
0 mins
10
Compact the Pavers
0 mins
Prev
Next
TermsPrivacySafetyLegal© 2026 Stesso, Inc.