Skip to main content
RR BuildingsRR Buildings
BrowseMy Projects
Log inSign up
RR Buildings

Step 4 · Install Gravel Base

Fill the excavated area with approximately 4-6 inches of crushed gravel (e.g., 3/4-inch clean crushed stone). Spread the gravel evenly using a rake. After spreading, compact the gravel layer thoroughly using a plate compactor. Repeat this process in 2-inch lifts if necessary to achieve the desired depth and a firmly compacted base.

Stesso home
SearchSearchBrowseBrowseMy ProjectsMy Projects
Log inLog inSign upSign up

Step 4 · Install Gravel Base

Fill the excavated area with approximately 4-6 inches of crushed gravel (e.g., 3/4-inch clean crushed stone). Spread the gravel evenly using a rake. After spreading, compact the gravel layer thoroughly using a plate compactor. Repeat this process in 2-inch lifts if necessary to achieve the desired depth and a firmly compacted base.

Videos for this step

Video 1Video 2Video 3

← Project

Concrete Paver Patio

Step 4 of 10·4 min left

Mark the Patio Area
0 mins
Excavate the Area
0 mins
Compact the Base
0 mins
4
Install Gravel Base
0 mins
5
Install Edge Restraints
0 mins
6
Add and Level Sand Bed
0 mins
7
Lay the Pavers
0 mins
8
Cut and Fit Edge Pavers
0 mins
9
Sweep Joint Sand
0 mins
10
Compact the Pavers
0 mins
Prev
Next
TermsPrivacySafetyLegal© 2026 Stesso, Inc.