Skip to main content

Cut Lumber for Step Frames — Cut Timber Frame Components

Beginner3 mins

Part of project

How to Build Timber and Gravel Steps on a Slope · Step 3 of 8

Helpful?

In this video

Use a tape measure and a speed square to accurately mark the dimensions for the step frame components on pressure-treated lumber. The video demonstrates cutting pieces for 16-inch deep steps. It's crucial to use pressure-treated lumber for all components that will be in contact with the ground or are part of the structural frame, as this material is resistant to rot and insect damage. Employ a circular saw to make precise cuts for all the frame pieces, including the outer box sections and the internal joists that will provide support for the treads.

194.5K views2.7K
Transcript
Hide

road now one of the most important pieces of information to know when it comes to building a deck or the steps for a deck basically anything that will be touching the ground is to ensure that the joists are made out of a pressure treated material th that will kind of basically prolong the life of your deck and not rot away in one to two years like our previous deck that the previous owners have built so in this situation uh because my deck has these concrete blocks completely around it I'm going to need to create I believe five or six different box frames that will surround that area sitting between those deck blocks nice and tight and so what I'm doing is basically Mass cutting all the pieces that will assemble it together so the deck is going to be 16 in deep and I'm basically cutting up all the pieces that I'll need to create the deck blocks and the reinforcing pieces down the middle and so finally for the assembling

Auto-generated transcript. May contain errors.