Skip to main content

Assemble the Wooden Frame — Assemble the Nook Frame

Beginner3 mins

Part of project

How to Build a Coat and Shoe Nook Under the Stairs · Step 3 of 9

Helpful?

In this video

Lay out the cut lumber pieces on a flat surface in the desired rectangular frame configuration. Using a drill/driver, pre-drill pilot holes at each joint to prevent wood splitting. Then, fasten the vertical side pieces to the horizontal top and bottom cross members using appropriate-length wood screws (e.g., 2-inch wood screws). For additional strength, apply wood glue to the joint surfaces before screwing them together, and use clamps to hold the pieces tightly while the glue sets. Periodically check for squareness using a corner square.

19.5K views501