Mount the Brackets
Part of project
How to Install a Retractable Baby Gate on Stairs · Step 4 of 6
In this video
Align the first mounting bracket with the pencil line you previously drew. Use the pencil to mark the locations of the four screw holes inside the bracket. To ease installation, take one of the screws and tap it lightly with a hammer into each marked spot, just enough to break through the drywall and create small pilot holes. Then, use a cordless drill equipped with the appropriate bit (hex or Phillips, depending on your screw heads) to screw the bracket into place. Partially drive in all screws before fully tightening them, ensuring the bracket remains aligned with your marks. Repeat this process for the remaining mounting brackets on both sides and any center support brackets, ensuring they are also aligned with the marks or positioned appropriately if not directly against a marked line.
Mount the Brackets
Part of project
How to Install a Retractable Baby Gate on Stairs · Step 4 of 6
In this video
Align the first mounting bracket with the pencil line you previously drew. Use the pencil to mark the locations of the four screw holes inside the bracket. To ease installation, take one of the screws and tap it lightly with a hammer into each marked spot, just enough to break through the drywall and create small pilot holes. Then, use a cordless drill equipped with the appropriate bit (hex or Phillips, depending on your screw heads) to screw the bracket into place. Partially drive in all screws before fully tightening them, ensuring the bracket remains aligned with your marks. Repeat this process for the remaining mounting brackets on both sides and any center support brackets, ensuring they are also aligned with the marks or positioned appropriately if not directly against a marked line.