Skip to main content

Install Mounting Brackets — Mount the Brackets

Beginner2 hours

Part of project

How to Install a Retractable Baby Gate on Stairs · Step 4 of 6

Helpful?

In this video

Align the pre-drilled holes with the holes in the mounting bracket. Use an impact driver or power drill to drive the screws through the bracket and into the wall, securing it firmly. If using drywall anchors, insert them first according to their specific instructions, then attach the bracket. Ensure the bracket is flush against the wall and doesn't wiggle. Be careful not to overtighten the screws, especially when working with drywall, as this can cause 'drywall pops' where the screw head breaks through the surface or pulls the anchor out.

20.6K views1.2K
Transcript
Hide

make sure you do apply a lot of pressure so you don't strip the screw head like I just did now I hold the bracket level and fasten it tight be careful not to over-tighten

Auto-generated transcript. May contain errors.