Skip to main content
RR BuildingsRR Buildings
BrowseMy Projects
Log inSign up
RR Buildings

Step 1 · Determine Gate Placement

Assess the intended location for the baby gate. For top-of-stair installation, identify two vertical mounting surfaces (wall studs or banister posts) that are plumb and provide sufficient width for the gate. For bottom-of-stair installation, the same applies. Ensure that the chosen location allows the gate to swing open fully without obstruction and that the retraction mechanism will have a clear path. Consider the height of the mounting points to align with the gate's operational range. Use a level to mark potential bracket positions to ensure they are aligned horizontally.

Stesso home
SearchSearchBrowseBrowseMy ProjectsMy Projects
Log inLog inSign upSign up

Step 1 · Determine Gate Placement

Assess the intended location for the baby gate. For top-of-stair installation, identify two vertical mounting surfaces (wall studs or banister posts) that are plumb and provide sufficient width for the gate. For bottom-of-stair installation, the same applies. Ensure that the chosen location allows the gate to swing open fully without obstruction and that the retraction mechanism will have a clear path. Consider the height of the mounting points to align with the gate's operational range. Use a level to mark potential bracket positions to ensure they are aligned horizontally.

Videos for this step

Mount Gate Assembly BracketsPosition Gate and Mark Wall CupsInstall Lower Wall Mounts (First Side)

Tools and Materials

← Project

How to Install a Retractable Baby Gate on Stairs

Step 1 of 6·1 hr left

1
Determine Gate Placement
15 minutes5 items
2
Mark Bracket Positions
10 minutes4 items
3
Drill Pilot Holes
5 minutes4 items
4
Mount the Brackets
15 minutes4 items
5
Attach the Gate Mechanism
10 minutes2 items
6
Test Gate Operation and Lock
5 minutes1 items
Prev
Next
TermsPrivacySafetyLegal© 2026 Stesso, Inc.