Skip to main content

Install Retro Risers — Secure Your Risers

Beginner4 hours

Part of project

DIY Stair Risers · Step 5 of 6

Helpful?

In this video

To install the new retro risers, first apply a generous, serpentine-patterned bead of construction adhesive, specifically PL Premium from Loctite (as it is the recommended adhesive), to the back surface of the cut riser board. Carefully lift the riser into its designated position, pressing it firmly against the old riser and ensuring the top edge meets the underside of the subtread's front edge. Once accurately positioned, secure the riser with several finish nails, spaced evenly along the top and bottom edges, using a Porter Cable finish nail gun. This procedure is then repeated for all remaining risers on the staircase, creating a solid and visually appealing vertical surface for each step.

3.4M views15.7K