
DIY Stair Risers
About This Project
Are you looking to solve the problem of an unfinished or outdated staircase? This DIY-friendly guide shows you how to create and install your own stair risers, a project that brings warmth and elegance to your home. While we specialize in making your stairs safer and more stylish with our treads, updating your risers is a foundational step in any easy DIY stair remodel. This process will give your staircase a clean, high-quality look that perfectly complements our non-slip treads.
Steps
Measure Each Riser with Care
30 minutesEvery staircase has its own unique character, which means you might find small differences between steps. Using a tape measure, carefully record the exact height and width of each individual riser. We always say, 'measure twice, cut once!' This simple habit prevents wasted material and ensures a professional result. Be sure to label each measurement so you know which riser it belongs to.
Watch: Measure Riser Length with Tread GaugeChoose and Cut Your Riser Material
60 minutesYour choice of material, such as plywood, MDF, or solid wood, will set the tone for your project. We believe in quality that lasts, so we recommend choosing a durable option that fits your budget. Using your precise measurements from Step 1, carefully mark and cut the material for each riser. For the cleanest cuts and a truly polished look, use a fine-toothed saw blade.
Watch: Measure and Cut First RiserSand and Clean for a Smooth Finish
45 minutesTo achieve that quality-focused result, take the time to sand all surfaces and edges of your cut risers until they are completely smooth. Once sanding is complete, it's crucial to remove every speck of dust. A tack cloth or a lightly damp rag is perfect for this. A clean, dust-free surface is essential for proper adhesion of primers, paints, or stains.
Watch: Sand and Clean RisersDry-Fit Each Riser
20 minutesThis is a key step for achieving peace of mind. Before applying any permanent adhesive, position each cut riser against its corresponding stair. Check that it fits snugly without any gaps. This is your chance to make any minor adjustments with a sanding block for that perfect, custom-fit. Catching any small errors now saves time and ensures a seamless final look.
Watch: Dry Fit Riser PieceSecure Your Risers
75 minutesApply a consistent bead of construction adhesive to the back of the riser. Position it firmly against the stair, ensuring it's square and flush. For maximum stability, secure the riser with a few finishing nails or screws. For a cleaner, more professional appearance, we recommend countersinking the nails (tapping them just below the surface) so you can fill the small holes before finishing.
Watch: Install First RiserFinish the Risers
120 minutesThis is where your design vision comes to life. After the adhesive has fully cured, apply your desired finish. Whether you're painting for a bright, clean look or staining to match your beautiful wood, patience is key. Apply thin, even coats, and always allow for the manufacturer's recommended drying time. Now that your risers look fantastic, you've created the perfect backdrop to add the finishing touch: a set of our treads where safety meets style.
Watch: Caulk and Paint Risers and Stringers



