Skip to main content

Install First Riser — Secure Your Risers

Beginner4 hours

Part of project

DIY Stair Risers · Step 5 of 6

Helpful?

In this video

Start the installation by taking the first pre-cut riser. Using a caulking gun, apply polyurethane construction adhesive in an 'S' shape along the entire backside of the riser. Carefully place the riser into its designated position on the staircase, ensuring you leave a 1/16 inch expansion gap all the way around it. Secure the riser by driving one finish nail into each of the four corners, then adding two more nails in the center, one at the top and one at the bottom, using your finish nailer.

83.8K views305