Skip to main content
RR BuildingsRR Buildings
BrowseMy Projects
Log inSign up
RR Buildings

Step 3 · Address Gaps with Shims and Adhesive

If there are visible gaps between the tread and the riser, or between the tread and the stringer, apply a wood adhesive into the gap. Then, carefully insert thin wood shims into the gap, tapping them gently until they are snug. The goal is to eliminate any play or movement. Trim any excess shim material flush with the tread surface once it's secure.

Stesso home
SearchSearchBrowseBrowseMy ProjectsMy Projects
Log inLog inSign upSign up

Step 3 · Address Gaps with Shims and Adhesive

If there are visible gaps between the tread and the riser, or between the tread and the stringer, apply a wood adhesive into the gap. Then, carefully insert thin wood shims into the gap, tapping them gently until they are snug. The goal is to eliminate any play or movement. Trim any excess shim material flush with the tread surface once it's secure.

Videos for this step

Apply 5-Minute Wood AdhesiveApply Wood Glue (Back Risers)Reinforce Risers and Treads with Adhesive and Timber

Tools and Materials

← Project

How to Stop a Stair Tread from Creaking and Shifting

Step 3 of 5·1.7 hr left

Inspect the Stair Tread
15 minutes2 items
Secure Loose Tread Edges
20 minutes5 items
3
Address Gaps with Shims and Adhesive
30 minutes4 items
4
Reinforce with Stair Tread Repair Brackets
45 minutes4 items
5
Fill Screw Holes and Finish
25 minutes5 items
Prev
Next
TermsPrivacySafetyLegal© 2026 Stesso, Inc.