Skip to main content
RR BuildingsRR Buildings
BrowseMy Projects
Log inSign up
RR Buildings

Step 2 · Secure Loose Tread Edges

If the edges of the stair tread are loose, drive screws or finish nails through the tread and into the underlying stringer or supporting joist. For a cleaner finish, use finish nails and set them slightly below the surface, or pre-drill pilot holes and use wood screws, countersinking them so the heads are flush or slightly below the wood surface. If driving screws from the top, consider filling the holes with wood putty later for a seamless look.

Stesso home
SearchSearchBrowseBrowseMy ProjectsMy Projects
Log inLog inSign upSign up

Step 2 · Secure Loose Tread Edges

If the edges of the stair tread are loose, drive screws or finish nails through the tread and into the underlying stringer or supporting joist. For a cleaner finish, use finish nails and set them slightly below the surface, or pre-drill pilot holes and use wood screws, countersinking them so the heads are flush or slightly below the wood surface. If driving screws from the top, consider filling the holes with wood putty later for a seamless look.

Videos for this step

Drive Screws to Secure Tread to RiserSecure Front Treads with ScrewsFasten New Treads with Screws

Tools and Materials

← Project

How to Stop a Stair Tread from Creaking and Shifting

Step 2 of 5·2 hr left

Inspect the Stair Tread
15 minutes2 items
2
Secure Loose Tread Edges
20 minutes5 items
3
Address Gaps with Shims and Adhesive
30 minutes4 items
4
Reinforce with Stair Tread Repair Brackets
45 minutes4 items
5
Fill Screw Holes and Finish
25 minutes5 items
Prev
Next
TermsPrivacySafetyLegal© 2026 Stesso, Inc.