Skip to main content
RR BuildingsRR Buildings
BrowseMy Projects
Log inSign up
RR Buildings

Step 5 · Install New Trim & Showerhead; Test for Leaks

This is the step people usually slow down on. Go finger-tight first, then a quarter turn. No rush — replay the clip whenever it helps.

Install the new handles, escutcheons, and showerhead according to the manufacturer's instructions. Carefully tighten all connections. Slowly turn the water supply back on and thoroughly check all connections for leaks. Adjust the temperature stop as needed.

Stesso home
SearchSearchBrowseBrowseMy ProjectsMy Projects
Log inLog inSign upSign up

Step 5 · Install New Trim & Showerhead; Test for Leaks

This is the step people usually slow down on. Go finger-tight first, then a quarter turn. No rush — replay the clip whenever it helps.

Install the new handles, escutcheons, and showerhead according to the manufacturer's instructions. Carefully tighten all connections. Slowly turn the water supply back on and thoroughly check all connections for leaks. Adjust the temperature stop as needed.

Videos for this step

Adjust Height and Test for LeaksTest for LeaksTest for Leaks

Tools and Materials

← Project

Shower & Tub Faucet Replacement: A Complete DIY Guide

Step 5 of 5·30 min left

Shut Off Water Supply & Drain Lines
5 minsBeginner
Remove Old Faucet Handles & Trim
30 mins1 itemsIntermediate
Remove Old Faucet Valves
1 min1 itemsAdvanced
Install New Faucet Valves
1 min2 itemsAdvanced
5
Install New Trim & Showerhead; Test for Leaks
30 mins1 itemsIntermediate
Prev
Next
TermsPrivacySafetyLegal© 2026 Stesso, Inc.