Skip to main content
RR BuildingsRR Buildings
BrowseMy Projects
Log inSign up
RR Buildings

Step 1 · Shut Off Water Supply & Drain Lines

Begin by turning off the main water supply to your bathroom. Locate the shut-off valves (usually under the sink or in the basement) and turn them clockwise until they stop. Then, open both the shower and tub faucets to relieve any remaining water pressure in the lines.

Stesso home
SearchSearchBrowseBrowseMy ProjectsMy Projects
Log inLog inSign upSign up

Step 1 · Shut Off Water Supply & Drain Lines

Begin by turning off the main water supply to your bathroom. Locate the shut-off valves (usually under the sink or in the basement) and turn them clockwise until they stop. Then, open both the shower and tub faucets to relieve any remaining water pressure in the lines.

Videos for this step

Turn Off the Water SupplyTurn Off WaterDrain the faucet

← Project

Shower & Tub Faucet Replacement: A Complete DIY Guide

Step 1 of 5·1.1 hr left

1
Shut Off Water Supply & Drain Lines
5 minsBeginner
2
Remove Old Faucet Handles & Trim
30 mins1 itemsIntermediate
3
Remove Old Faucet Valves
1 min1 itemsAdvanced
4
Install New Faucet Valves
1 min2 itemsAdvanced
5
Install New Trim & Showerhead; Test for Leaks
30 mins1 itemsIntermediate
Prev
Next
TermsPrivacySafetyLegal© 2026 Stesso, Inc.