Skip to main content
RR BuildingsRR Buildings
BrowseMy Projects
Log inSign up
RR Buildings

Step 2 · Remove Old Faucet Handles & Trim

This is the step people usually slow down on. Go finger-tight first, then a quarter turn. No rush — replay the clip whenever it helps.

Carefully remove the handles and escutcheons from both the shower and tub faucets. Use a screwdriver to remove the screws; penetrating oil may be necessary for stubborn, corroded screws. Gently pry off any decorative caps before unscrewing.

Stesso home
SearchSearchBrowseBrowseMy ProjectsMy Projects
Log inLog inSign upSign up

Step 2 · Remove Old Faucet Handles & Trim

This is the step people usually slow down on. Go finger-tight first, then a quarter turn. No rush — replay the clip whenever it helps.

Carefully remove the handles and escutcheons from both the shower and tub faucets. Use a screwdriver to remove the screws; penetrating oil may be necessary for stubborn, corroded screws. Gently pry off any decorative caps before unscrewing.

Videos for this step

Remove Old FixturesRemove Trim Sleeve and Escutcheon PlateRemove the Handle and Escutcheon Plate

Tools and Materials

← Project

Shower & Tub Faucet Replacement: A Complete DIY Guide

Step 2 of 5·1 hr left

Shut Off Water Supply & Drain Lines
5 minsBeginner
2
Remove Old Faucet Handles & Trim
30 mins1 itemsIntermediate
3
Remove Old Faucet Valves
1 min1 itemsAdvanced
4
Install New Faucet Valves
1 min2 itemsAdvanced
5
Install New Trim & Showerhead; Test for Leaks
30 mins1 itemsIntermediate
Prev
Next
TermsPrivacySafetyLegal© 2026 Stesso, Inc.