Skip to main content
RR BuildingsRR Buildings
BrowseMy Projects
Log inSign up
RR Buildings

Step 7 · Test for Leaks and Functionality

Turn the water supply back on slowly. Check thoroughly for leaks around all connections. Test the shower to ensure hot and cold water are working correctly and at the desired temperature.

Stesso home
SearchSearchBrowseBrowseMy ProjectsMy Projects
Log inLog inSign upSign up

Step 7 · Test for Leaks and Functionality

Turn the water supply back on slowly. Check thoroughly for leaks around all connections. Test the shower to ensure hot and cold water are working correctly and at the desired temperature.

Videos for this step

Test the RepairRestore Water and Test for LeaksTurn On Water and Test for Leaks

← Project

Shower Cartridge Replacement: A Step-by-Step DIY Guide

Step 7 of 7·5 min left

Shut Off the Water Supply
5 minsBeginner
Remove the Shower Handle
10 mins1 itemsIntermediate
Remove the Valve Trim
15 mins1 itemsAdvanced
Extract the Old Cartridge
15 mins1 itemsAdvanced
Install the New Shower Cartridge
10 mins1 itemsIntermediate
Reassemble the Shower Faucet
15 mins1 itemsIntermediate
7
Test for Leaks and Functionality
5 minsBeginner
Prev
Next
TermsPrivacySafetyLegal© 2026 Stesso, Inc.