Skip to main content
RR BuildingsRR Buildings
BrowseMy Projects
Log inSign up
RR Buildings

Step 3 · Remove the Valve Trim

This is the step most people slow down on. Take it one move at a time — there’s no rush, and you can rewind the clip as many times as you need.

Remove the valve trim or decorative cover surrounding the cartridge. This may involve unscrewing screws or carefully releasing clips. If the trim is stuck, a utility knife might help to break any caulking seal.

Stesso home
SearchSearchBrowseBrowseMy ProjectsMy Projects
Log inLog inSign upSign up

Step 3 · Remove the Valve Trim

This is the step most people slow down on. Take it one move at a time — there’s no rush, and you can rewind the clip as many times as you need.

Remove the valve trim or decorative cover surrounding the cartridge. This may involve unscrewing screws or carefully releasing clips. If the trim is stuck, a utility knife might help to break any caulking seal.

Videos for this step

Remove Old Faucet TrimRemove the cover plateRemove valve trim

Tools and Materials

← Project

Shower Cartridge Replacement: A Step-by-Step DIY Guide

Step 3 of 7·1 hr left

Shut Off the Water Supply
5 minsBeginner
Remove the Shower Handle
10 mins1 itemsIntermediate
3
Remove the Valve Trim
15 mins1 itemsAdvanced
4
Extract the Old Cartridge
15 mins1 itemsAdvanced
5
Install the New Shower Cartridge
10 mins1 itemsIntermediate
6
Reassemble the Shower Faucet
15 mins1 itemsIntermediate
7
Test for Leaks and Functionality
5 minsBeginner
Prev
Next
TermsPrivacySafetyLegal© 2026 Stesso, Inc.