Skip to main content
RR BuildingsRR Buildings
BrowseMy Projects
Log inSign up
RR Buildings

Step 6 · Reassemble the Shower Faucet

This is the step people usually slow down on. Go finger-tight first, then a quarter turn. No rush — replay the clip whenever it helps.

Reassemble all components (trim, handle, etc.) in the reverse order of disassembly. Ensure everything is tightened securely. Applying a bead of silicone caulk around the valve body before reinstalling the trim will help create a watertight seal and prevent future leaks.

Stesso home
SearchSearchBrowseBrowseMy ProjectsMy Projects
Log inLog inSign upSign up

Step 6 · Reassemble the Shower Faucet

This is the step people usually slow down on. Go finger-tight first, then a quarter turn. No rush — replay the clip whenever it helps.

Reassemble all components (trim, handle, etc.) in the reverse order of disassembly. Ensure everything is tightened securely. Applying a bead of silicone caulk around the valve body before reinstalling the trim will help create a watertight seal and prevent future leaks.

Videos for this step

Reassemble and Seal the Shower FixtureReassemble the SillcockTurn The Water Back On And Test

Tools and Materials

← Project

Shower Cartridge Replacement: A Step-by-Step DIY Guide

Step 6 of 7·20 min left

Shut Off the Water Supply
5 minsBeginner
Remove the Shower Handle
10 mins1 itemsIntermediate
Remove the Valve Trim
15 mins1 itemsAdvanced
Extract the Old Cartridge
15 mins1 itemsAdvanced
Install the New Shower Cartridge
10 mins1 itemsIntermediate
6
Reassemble the Shower Faucet
15 mins1 itemsIntermediate
7
Test for Leaks and Functionality
5 minsBeginner
Prev
Next
TermsPrivacySafetyLegal© 2026 Stesso, Inc.