Skip to main content
RR BuildingsRR Buildings
BrowseMy Projects
Log inSign up
RR Buildings
Project video

Step 7 · First Top Coat Application

We always spray our trim to get that flawless, automobile finish with no brush marks. But if you're not spraying, use a high-quality brush for the details and a mini-roller for the flat sections. The goal is a nice, even coat. Don't load it on too heavy or you'll get drips and runs. Keep your strokes smooth and consistent.

Stesso home
SearchSearchBrowseBrowseMy ProjectsMy Projects
Log inLog inSign upSign up

Step 7 · First Top Coat Application

We always spray our trim to get that flawless, automobile finish with no brush marks. But if you're not spraying, use a high-quality brush for the details and a mini-roller for the flat sections. The goal is a nice, even coat. Don't load it on too heavy or you'll get drips and runs. Keep your strokes smooth and consistent.

← Project

Pre-painting Baseboards

Step 7 of 10·28.5 hr left

Initial Board Inspection
15 minutes
The First Sanding Pass
30 minutes
Dust Removal: Absolute Must
10 minutes
Apply a Quality Primer
45 minutes
Let the Primer Cure
120 minutes
The 'De-Nib' Sand
20 minutes
7
First Top Coat Application
45 minutes
8
Let the First Coat Dry
180 minutes
9
Applying the Final Coat
45 minutes
10
The Final Cure: Be Patient
1440 minutes
Prev
Next
TermsPrivacySafetyLegal© 2026 Stesso, Inc.