Skip to main content
RR BuildingsRR Buildings
BrowseMy Projects
Log inSign up
RR Buildings
Project video

Step 2 · The First Sanding Pass

Grab some fine-grit sandpaper and give every surface that's going to get paint a quick pass. All you're doing is creating a mechanical profile for the primer to grab onto. You can never go wrong by sanding. Pay close attention to any rough spots or mill marks from the factory.

Stesso home
SearchSearchBrowseBrowseMy ProjectsMy Projects
Log inLog inSign upSign up

Step 2 · The First Sanding Pass

Grab some fine-grit sandpaper and give every surface that's going to get paint a quick pass. All you're doing is creating a mechanical profile for the primer to grab onto. You can never go wrong by sanding. Pay close attention to any rough spots or mill marks from the factory.

← Project

Pre-painting Baseboards

Step 2 of 10·32.3 hr left

Initial Board Inspection
15 minutes
2
The First Sanding Pass
30 minutes
3
Dust Removal: Absolute Must
10 minutes
4
Apply a Quality Primer
45 minutes
5
Let the Primer Cure
120 minutes
6
The 'De-Nib' Sand
20 minutes
7
First Top Coat Application
45 minutes
8
Let the First Coat Dry
180 minutes
9
Applying the Final Coat
45 minutes
10
The Final Cure: Be Patient
1440 minutes
Prev
Next
TermsPrivacySafetyLegal© 2026 Stesso, Inc.